Home
Contact
Site Map
HomeYour are here  Home Products Show Seals and Gaskets |
Seals and Gaskets: Total 52 Products | 21 - 40
Carbon Fiber Packing - BP005
This product is a braided packing made of carbonized poly acrylonitrile fiber and finished with PTFE dispersionand lubricant. It covers wide range of application, Relatively economical among non-asbes...
Ramie Packing - BP006
This packing is made of ramie fiber impregnated with PTFE plus lubricant. For pumps, refiners, filters and valves in the brewing and beverage industry, ship-building and other fields. Especially resis...
PTFE Graphite Packing - BP007
It is manufactured from continuous filament fiberglass yarn that has a chemical resistance. Each strand of fiberglass is treated with PTFE suspensoid and then, after it is braided, it is again treated...
Fiberglass Packing with PTFE - BP008
It is a packing capable of a wide variety of uses throughout a plant. It may be used on water, steam, solvents, mild acids and alkalies. and slurries in pumps, expansion joints, mixers and agitators t...
Acrylic Fiber Packing with PTFE Impregnation - BP009
The braided packing made from acrylic fiber with graphite impregnation and lubricants. It is usable for feeble acids and basics, steam, oil....
PTFE Molded Sheets - P001
Features: 1) Material: suspended PTFE resin 2) Corrosion resistant 3) Unloaded temperature range: -180 -- +260oC 4) Lowest friction coefficient in known solid materials 5) Used in anti-corrosive liner...
Teflon Skived Sheet - P002
Specifications: 1) Skived PTFE sheet material: 100% PTFE resin ptfe adhesive tape, ptfe adhesive tapes2) Temperature limit: -100 -- 250oC 3) Pressure limit: 20Mpa 4) Main applications: processing spac...
PTFE Rod - P003
Two types of PTFE rods are available. The rods of diameter 4-9mm are extruded from dispersion PTFE resin, those of diameter 10-50mm are plunger-extruded from suspension PTFE and that of diameter above...
PTFE Tube - P004
Specifications: 1) Density: 2.1-2.3g/CBM 2) Temp resist: -180-200 degrees celsius 3) Tensile strength: above 15Mpa 4) Elongation at break: above 200% 5) Outer diameter: 20-300mm 6) Wall thickness: 5-1...
Expanded PTFE Sealant Joints - P005
100% pure expanded P.T.F.E.Joint Sealants with self-adhesive film.It's an idea sealant for most pipe fitting and equipments flanges sealing....
Rubber O-Rings - RR010
Material: 1) Viton 2) Silicone / FEP 3) PTFE 4) Urethane 5) Silicone 6) Fluorosilicone 7) Buna nitrile 8) Split PTFE / backup 9) Solid PTFE / backup 10) Neoprene 11) EPDM 12) Viton / FEP 13) Nitrile e...
Rubber Sheets - RR011
Features: 1) Density: a) CR sheet: 1.6 b) CR + cloth: 1.6 c) NBR sheet: 1.6 d) NBR + cloth: 1.6 e) EPDM sheet: 1.55 f) Viton sheet: 1.7 g) SBR sheet: 1.8 h) NR sheet: 1.8 i) White CR: 1.6 j) Red CR: 1...
Ceramic yarn - CF001
Ceramic fiber yarn CF001 Used to process various kinds of ceramic fiber products or directly used as fire-resistant, fireproof and heat preservation and thermal insulation material for heating equipme...
Ceramic Tape - CF002
Ceramic fiber tape CF002 Specification: width: 25-100mm Length: 30m or according to customer's requirement Thickness: 1.5-5.0mm Reinforced material: SS304 wire, glass fiber...
Ceramic Rope - CF003
Ceramic fiber rope CF003 Specification: Dia.: 3-60mm; Reinforced material: SS304 wire, glass fiber 30kg/roll or according to customer's requirement...
Previous | 1 | 2 | 3 | Next
Carbon Fiber Packing - BP005This product is a braided packing made of carbonized poly acrylonitrile fiber and finished with PTFE dispersionand lubricant. It covers wide range of application, Relatively economical among non-asbes...
Ramie Packing - BP006This packing is made of ramie fiber impregnated with PTFE plus lubricant. For pumps, refiners, filters and valves in the brewing and beverage industry, ship-building and other fields. Especially resis...
PTFE Graphite Packing - BP007It is manufactured from continuous filament fiberglass yarn that has a chemical resistance. Each strand of fiberglass is treated with PTFE suspensoid and then, after it is braided, it is again treated...
Fiberglass Packing with PTFE - BP008It is a packing capable of a wide variety of uses throughout a plant. It may be used on water, steam, solvents, mild acids and alkalies. and slurries in pumps, expansion joints, mixers and agitators t...
Acrylic Fiber Packing with PTFE Impregnation - BP009The braided packing made from acrylic fiber with graphite impregnation and lubricants. It is usable for feeble acids and basics, steam, oil....
PTFE Molded Sheets - P001Features: 1) Material: suspended PTFE resin 2) Corrosion resistant 3) Unloaded temperature range: -180 -- +260oC 4) Lowest friction coefficient in known solid materials 5) Used in anti-corrosive liner...
Teflon Skived Sheet - P002Specifications: 1) Skived PTFE sheet material: 100% PTFE resin ptfe adhesive tape, ptfe adhesive tapes2) Temperature limit: -100 -- 250oC 3) Pressure limit: 20Mpa 4) Main applications: processing spac...
Nylon Sheet - P007
PTFE Rod - P003Two types of PTFE rods are available. The rods of diameter 4-9mm are extruded from dispersion PTFE resin, those of diameter 10-50mm are plunger-extruded from suspension PTFE and that of diameter above...
Nylon Rod - P006
PTFE Tube - P004Specifications: 1) Density: 2.1-2.3g/CBM 2) Temp resist: -180-200 degrees celsius 3) Tensile strength: above 15Mpa 4) Elongation at break: above 200% 5) Outer diameter: 20-300mm 6) Wall thickness: 5-1...
Expanded PTFE Sealant Joints - P005100% pure expanded P.T.F.E.Joint Sealants with self-adhesive film.It's an idea sealant for most pipe fitting and equipments flanges sealing....
Rubber O-Rings - RR010Material: 1) Viton 2) Silicone / FEP 3) PTFE 4) Urethane 5) Silicone 6) Fluorosilicone 7) Buna nitrile 8) Split PTFE / backup 9) Solid PTFE / backup 10) Neoprene 11) EPDM 12) Viton / FEP 13) Nitrile e...
Rubber Sheets - RR011Features: 1) Density: a) CR sheet: 1.6 b) CR + cloth: 1.6 c) NBR sheet: 1.6 d) NBR + cloth: 1.6 e) EPDM sheet: 1.55 f) Viton sheet: 1.7 g) SBR sheet: 1.8 h) NR sheet: 1.8 i) White CR: 1.6 j) Red CR: 1...
O-Ring Box - 8B
Metric O-Ring Box - 5C
Imperial O-Ring Box - 5B
Ceramic yarn - CF001Ceramic fiber yarn CF001 Used to process various kinds of ceramic fiber products or directly used as fire-resistant, fireproof and heat preservation and thermal insulation material for heating equipme...
Ceramic Tape - CF002Ceramic fiber tape CF002 Specification: width: 25-100mm Length: 30m or according to customer's requirement Thickness: 1.5-5.0mm Reinforced material: SS304 wire, glass fiber...
Ceramic Rope - CF003Ceramic fiber rope CF003 Specification: Dia.: 3-60mm; Reinforced material: SS304 wire, glass fiber 30kg/roll or according to customer's requirement...
Previous | 1 | 2 | 3 | Next
| Products Category |
- Asbestos Fiber (2)
- Carbon Fiber (1)
- Ceramic Fibers (7)
- Gasket Sheets (9)
- Gaskets (7)
- Gland Braided Packing (9)
- Glass Fiber (5)
- PTFE Rods (4)
- PTFE Sheet (3)
- Rubber Seals (5)
- Fibreglass Cloth (4)
- Flexible Composite Material (7)
- Insulating Film (4)
- Insulating Laminated Material (16)
- Insulating Plastic (4)
- Insulating Strips (4)
- Insulating Tube (2)
- Butterfly Valves (5)
- Faucet Sprayers (12)
- Faucets (10)
- PPR Fittings (6)
- PPR Valves (3)
- PVC Ball Valves (17)
- PVC Fittings (16)
| Contact Info |
|
Omen Industrial Co., Ltd. Tel: 0086-574-88183823 Fax: 0086-574-83030721 Key Contact: Mr. Omen Online Inquiry |
Chinese
English
German
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian
By SupplierList.com